BT-105 Enameled Wire Stripper
■ Be applicable to depainting for motor, transformer, voice coil of the temperature level (130),(155),(180),and other
high temperature enameled wire;
■Operate in normal temperature;
■ Environmental protection (qualified by RoHs test), fast, 0 -10 min to remove.
■ BT-105 Enameled Wire Stripper is a white emulsion;
Enamelled wire→Immersed in the solution,1-10min → wash the wire→ wash → solder
■ BT-105 uses 600g / Bottle of strong acid plastic drum,20 bottles/case;
■ Stored at 25 ℃ below, airtight container, the shelf life is 6 months;
■ BT-105 should be stored to ensure ventilation, drying, to prevent direct sunlight, and isolate the source of fire, away from heat.
■ Avoid exposure, rain, high temperature at transit.
■ You should be careful when you open the lid, as the internal pressure is bigger than external. the lid may spout.
■ You should wear protective gloves, protective clothing, masks, glasses, avoid to contact with skin, eyes, if you are injured,flush with water immediately (severe required medical diagnosis);