Removable liquid rubber paint

Description: 

In the vehicle modification industry for a variety of materials both inside and outside the vehicle surface shading and protection. 

Such as: Wheels, mirrors, grille, door handles, logo, interior, lights and so on. 

Can easily peel off, does not affect the original condition. 

Compared with the spray paint, has a unique advantage

Applicable Material and Performance: 

Wood products: Seal and protect the wood from climate impact, to prevent cracking. 

Metal products: Reduce jitter, eliminate noises, anti-corrosion, insulation, heat insulation. 

Glass products: Glass broken to prevent splash (using transparent Plasti DIP)

Rope / woven goods: Anti-wind and rain, to prevent rot and damage. 

Plastic Products: Protect soft surface is not scratched. 

Rubber products: Weatherproof, resistant to wear and tear. 

Paper products: Weatherproof, to prevent breakage. Such as: Map. 

Instructions: 

1.20-30 cm from the surface to be coated spraying, atomizing spray to achieve good results. 

2. Move spraying, repeated covering the surface, do not point-like or linear spraying. 

3. After spraying to form a uniform, wet surfaces. 

4. To achieve the best results, you need to spray 3-4 times at intervals of 30 minutes. 

5. At least four hours before natural drying reach maximum hardness. 

6. If the temperature is low will cause large particles spray droplet or filamentous, spray cans can be soaked in warm water for 5-10 minutes better atomized spray mist.