Detailed parameter :
size:1800*26mm
Light sourse :SMD 3528
SMD 3528  pcs :384
Power :26w
Working voltage :AC100-240V
Cover :Clear cover/Stripe cover/Frosted cover
Lumens :clear cover    2300lm
                stripe cover    2200lm 
                frosted cover  1850lm
Shell Materials:Half PC & Aluminums Alloy
Viewing Angle:120
Work Lifetime:50 000 hours
Packing detail :Carton size :190*31*26cm,30pcs/carton

1: Product feature:
Special design of light, no visible light spot,, no glare, the light is soft and brightness
Environment friendly, no lead, no mercury, no nickel
LED light working with low voltage & current, comprehensive protection for circuit, no danger to human body, up to90% electricity transferred to light energy which is 4 times than filament light and 3 times than fluorescent light, more effective, less heat produced
No flick, instant lighting, harmless to visual-health
Up to 60%-70% energy saving than filament light
Well-finished surface treatment for alloy Alu & tough PC used for shell which made the light is anti-pressure and anti-abrasion
Perfect combinations of light fixture made the LED light working under low temperature, the lumens depreciation of LED light is 1-2% in every 1000 hours, and its life span is more than 50,000 hours
High CRI made the light can be used in industrial & residential & commercial lighting
CE , Rohs & FCC certificated
2: Structure

1.plastic caps: inflaming retarding PC
2.LED
3.PC cover: inflaming retarding PC
4.Pins copper
5.Power supply: internal power supply
6.Radiator 6063 aluminum
7.PCBA
3: Installation instruction:
1,When installing the LED lamp to the conventional fluorescent lamp hanger, please pay attention to the conventional lamp hanger.
Method of installing LED lamp to electronic & inductive ballast lamp hanger as below:
A* When installing LED lamp to Inductive ballast lamp hanger:
1* Take out the starter from the inductive ballast lamp hanger.
2* Install the LED lamp into the inductive ballast lamp hanger directly.
B* Installing LED lamp to Electronic ballast lamp hanger:
1* Take out the starter from the electronic ballast lamp hanger.
2* Take away the electronic ballast from the lamp hanger.
3* Then connect the wire with LED lamp directly.
Be sure the starter is removed before you install the LED lamp to conventional fluorescent lamp hanger.
2, the installation instructions
Inductive or electronic ballast bracket installation of LED lamps methods:

Note: cut off the power before installation.