Specification

Model No.: DTC105RS40

Outer Diameter: 10.5 mm
Beads Number: 40/m
Height of work layer: 6.4 mm
Construction Method: rubber & spring
Cutting Objects: normally/highly reinforced concrete, steels
Line Speed: 18-25 m/s according to different objects
Cutting Speed: 0.5-2.0 m²/h according to different objects
Wire Life: 0.5- 2.0 m²/m according to different objects

Other specification are available upon buyer’s requirements

Feature

1.High performance and low cost and waste

2.Smooth cutting face and accurate of processing

3.Safty and good for environmental protection.

4.The diameters including: 8.5/9.0/10/10.5/11/11.5mm

Applications

Diamond wire saw is applied to stone quarrying, block shaping, cutting for abnormal shape and carrying out construction engineering and so on. Different bonded and diamond concentration is available for material such as granite, marble, concrete, limestone, sandstone etc.

Packing

Inner package is Carton box, outside pack are choose according to the transport way. By air, used for carton pack to reduce the weight, and by sea, use for wooden for waterproof.

Delivery

Within 7 to 15 days