10000-12000BPH Small Bottle Water Filling Machine

Email:yangcony@outlook.com

Production Capacity: 10000～12000bottles/h;
Filling Condition:Filling Temperature: Normal Temperature;
Filling Type: Constant Pressure.
Water: 1.8T/h ( Un-including drink water)
LWH dimension: 4220mm*2200mm*2500mm;
Net Weight: 4600kg
 

10000-12000BPH Mineral Water Filling Machine Technological Parameters

Production Capacity & Head Quantity:
Production Capacity: 10000-12000bottles/h;
Washing Head Quantity: 32;
Filling Valve Quantity: 32;
Capping Head Quantity: 12
Filling Condition:
Filling Temperature: Normal Temperature;
Filling Type: Constant Pressure.
Consumption:
Power: Main Motor: 4KW
Ordering-Cap Motor: 0.18KW
Cap Elevating Motor: 0.34KW
Washing Pump: 0.37KW
Liquid Inlet Pump:1.1KW
Air Convey Motor: 2.2KW
Reflux Pump: 0.55KW
Water: 1.8T/h ( Un-including drink water)
Main Size:
Central Diameter of Filling Valve:  1280mm;
Central Diameter of Capping Machine: 480mm;
Central Diameter of Washing Machine: 1280mm
Outside Size & Weight of Main Machine
Whole Length: 4220mm;
Whole Width: 2200mm;
Whole Height: 2500mm;
Net Weight: 4600kg

Main Machine Type:
1.Entering and Exit Bottle Type: Straight line, that is bottle entering on the left side of the chain, bottle exit on the right side of the chain.
2.Rotational Direction of Each Machine: Clockwise;
3.Washing, Filling Pipeline: Liquid Supplying in the lower

Structural Design: The sanitary demands is thought completely in the unit.
1.The filling cylinder, filling valve and all of parts which touch the materials are all made of micro-carbon stainless steel. It has good corrosion-proof characteristics and it is easily washed.
2.The work table is covered with stainless steel and strictly sealed to protect the driving device in the ground frame. It is helpful for washing table and keep clean.

Filling Quality: High-speed, high-quality filling valve ensure good filling quality.
1.Filling Valve used in XGF Type Washing, Filling, Capping (Three-in-One) Unit has high filling efficiency. Its registered filling speed is 125ml/s, no filling loss, no leak in exhausting pipe.
2.The liquid level in bottle controls correctly. Its height error is different with the bottle neck diameter. Normally, it does not surpass ±5mm.
3.Filling action is correct.

Capping Quality:
Capping adopts magnetic constant moment to screw cap. The screwing cap moment is adjustable steplessly to reduce cap damaging and the seal is tightly.

Operation is reliable. It adopts PLC programmable control and it has high automation level.
1.It adopts frequency controller to govern steplessly. The speed adjustment is very convenient.
2.It has safe and reliable auto filling system. No-Bottle no-opening valve safe device makes filled liquid no lose.
3.The liquid level of the floating ball is installed to control correctly the liquid height in the filling cylinder to make the filling valve work steadily.
4.It has auto-stop protection while bottle is blocked and start wheel displaces. Once a bottle is dropped and the driving wheel is blocked to make the star wheel displaces, the machine will auto stops at once to avoid the machine damaging.

The run is steady: 
The design of the bottle chain and material ensure steady supplement of bottles. The start wheel and bottle guide plate are made of stainless steel and engineering plastic product to ensure bottle steady moving at high speed.

The adjustment is convenient. 
1.Washing Machine: Turn the airway and hang-wheel nut with hand to adjust need height of bottle.(Seeing Drawing 1)
2.Filling Machine: Adjust nut with tool to adjust need height ( Seeing Drawing 4).
3.Capping Machine: Insert the stop-rotation plate into V-Shaped Channel outside the nut, inch the motor to lift or fall.