What is one-key start and its function?

As we all know, when we want to start a car, we need to use a car key. But when you lose your key, you can not drive your car any more. Therefore, we invent this product to make people's life more convenient.

 

Button Start / Keyless Go System
Button Start / Keyless GO System is a new electrical appliance designed for vehicle
aftermaket . With this system,driver can start/stop the vehicle engine without turning key.

Specification & features

1. Low consumption standby currency: 0.6mA@12V

2. Large range of working voltage: 9.0V—24.0V

3. Working temperature: -40°C~85°C

4. 4 channel currency drive (40A): ACC, IG1, IG2, and START.(Not Relay: ACC,IG1,IG2and Start are all controlled by IC,this can avoid power failure in driving.)

5. Adopts original imported ignition IC instead of a relay which may cause touching point burnt or broken off when shaken.

6. Built-in double-button switch

7. High-temperature protection, high-voltage/short circuit protection

8. Power-off memory function supported to make sure the safety of driving

9. We use MCU imported from Microchip Company in USA for a stable capability and functioning

10.Disarmed by the driver`s remote controller.

11.Passive Arming

 

How to install Button start (one-key start)

 

 

Operation method

1. Power connected: if you just want to listen to music, just press the blue POWER BUTTON one time and ACC will be on. When you press it once more, it will power off.

2. Engine start: Keep pressing the brake, and press POWER BUTTON lightly and your engine will retrofire automatically.

How can I do if it can not be ignited due to low temperature in winter or low battery?

You can keep pressing the brake and POWER BUTTON at the same time until car is started.

3. Flameout: When engine is working, press the brake and then press POWER BUTTON for 0.5 Seconds and your engine will stop working automatically.

 

How to use?

 

Operation Introduction
Disarm / Arm: when the driver unlock the vehice by his(her) remote controller,the system disarm automatically,and 30 seconds later, if ACC or ON is not on, the system will enter arm state automatically.
ACC: in disarming state, push the button once.
ON: in disarming state, push the button twice.
Start: in disarming state, pushing the button 3 seconds, or stepping the brake and push the button once.
When the voltage of the vehicle battery is not sufficient or in winter, maybe you need longer time to start the vehicle, pushing the button for a serveral seconds can extend the time of ignition.
Stop: step on the brake and pushing the button 0.5 seconds.

 

This One-key start/button start can work with PKE system. Please see below:

 

Perfect match : Remote Passive Keyless Entry System (Smart Key) + One-key start

Remote keyless entry system /one-key start igniton for cars

 

 

 

Package List:

One-key Start kits including:

Main unit: 1 pc

Start button: 1 pc

Installation cables: 1pc

Connection cable: 1pc