Floor deck roll forming machine before and after the two corners line up the shaft from the large end of the height of the frame in the end the amount of the same, and then routed to the last row from the first, to find a line straightened, check , the lower shaft is in a straight line, the lower shaft left and right sides tune into levels. The Chi Kok tile press equipment first row and the last row to find a good center, then tighten lock nut on both sides, in the middle rounds in the center front, rear pull a good one straight line, the upper and lower shaft gap adjustment is completed, can be adjusted along the line Floor Deck roll forming Machine.

http://www.xinnuochina.com/floor/68.html