RUBBER EXTRUDER

Type :
hot feed rubber extruder , cold feed rubber extruder , Pin barrel cold feed rubber extruder , exhaust cold feed rubber extruder , rubber strainer extruder . Lab extruder

Model :

hot feed rubber extruder :XJ-30, XJ-65, XJ-85 , XJ-115 , XJ-150

Normal cold feed rubber extruder :xjw-65 , xjw-85 , xjw-115

Pin barrel cold feed rubber extruder :xjd-50 , xjd-65 , xjd-75 , xjd-90 , xjd-120

exhaust cold feed rubber extruder : xjd-90

we can also design for your need

Extruder head and die :
this can be designed according to your need


Features

1. Screw is made of best 38CrMoALA, its hardness is higher generally than HRC62 ( 60-65 ), Depth of nitrogen is higher than 0.55-0.7 mm ( 0.4-0.7 )

2. Bush is also made of 38CrMoALA, its hardness is generally higher than HRC66( 65-70 ), Depth of nitrogen is generally higher than 0.55-0.7 mm ( 0.4-0.7 mm )

3. Feeding device is made of feeding roller and feeding barrel, Feeding roller is driven by gears and its structure resembles Italy type. The rubber will never leak out, then it is never impossible for that the rubber enters into the bearing bush.


parameters of rubber extruder machine

Type

Screw shaft
Diameter
Length/dia-
meter ratio
L/D Highest rotational
speed of screw shaft
r/min Motor
power
KW Highest produce
capacity
kg/h
XJ-45 φ45 4.51 78 5 40
XJ-65 φ65 41 70 10 80
XJ-115 φ115 4.81 65 22 420
XJ-120 φ120 4.81 65 30 530
XJ-150 φ150 4.61 60 55 900
XJ-200 φ200 4.351 58 75 2200