Stainless steel shower channel DRAINI
extra flat, EDGE DRAIN, removable odor trap
 
Very elegant DIAODRAIN stainless steel shower drain with removable drain cover
stainless steel, with an elegant glossy Edge-design.
By discretely inserted into the end edge of the aperture only remains in the installed

state, the
High gloss stainless steel surface with the lateral width 6mm drain slit visible.
Individual can not make the bath.
The end panel is always easy and hygienic cleaning by the large smooth stainless steel

surfaces.
 
With surrounding Fliesenflanschkante 20mm wide for easy access and maximum load tiles.
The exact Fliesenflanschkonstruktion 15mm below the gutter edge,
leaves room for more tiles and facilitates the access gap.
 
In addition, the channel is equipped with adjustable steel legs and can be easily adapts

different mounting heights.
Expresses the flat design of only 67 mm makes it even low profile.
Of course, the solid steel gutter drain incl Adapter for 40mm or 50mm tubes supplied.
 
This allows to easily and flexibly realize the barrier-free transition from the wet to the

dry area.
The removable grate provides convenient access at all times to the siphon and a good

cleaning ability of the channel and the drain body.
In addition, the trap is completely removable and therefore easier to clean.
 
 
 
Product advantage:
- Super slim elegant stainless steel trough, SS 304
- Revolving stable Fliesenflansch
- High-gloss end panel with side edge flow
- Drain suitable for plastic pipes with 40mm or 50mm cuffs
- 4 built-in spacers ensure the precise flow aperture in the channel
- Stainless steel with removable plastic trap
- One-piece removable stainless steel cover
- Height-adjustable feet anchor
- Extra flat only 67mm
 
 
 
Data:
Channel length: 600 mm (total length 640 mm including Fliesenflansch)
Channel width: 70 mm
Overall width: 110 mm (incl. Fliesenflansch)
Channel height approx: 25 mm (including G-closure approximately 67 mm)
Fliesenflansch about: round 20 mm wide, 15 mm below the gutter edge
Tile channel: 12 mm deep, 48 mm wide (inside dimensions)
Discharge capacity approx: 35 l / min
Tube diameter: 40 mm (50 mm with adapter)
 
Scope of delivery:
1 St.  Stainless Steel Shower channel DRAINI 600 mm
including stainless steel drain cover illustrated with Edge-like
2 pcs ground anchor
1 pc adapter 40/50mm
 
optionally available in our shop as well as 700, 800, 900 and 1000 mm