Product Description:
Fiber optic visual fault locator adopt 650nm laser diode as a light emitting device, the output power can be up to 1-30mw. It’s applied to single-mode or multi-mode fiber measurements.HY-16 uses 3pcs of 1.5v AA battery for power supply, making up the deficiency which power supply time for traditional 2pcs battery is short. It uses FC adapters as an output interface, in the meantime, you can use SC / ST adapters without configuring the conversion interface , it can optionally connect all frequently-used joint.HY-16 is an ideal tool to test various types of optic fiber patch cords, , ribbon, bundle fiber optic pigtail and maintain a variety of fiber optic lines for you.

Features:
o Small size, easy to carry ;
o Measuring range up to 1-30km;
o Easily identify the fiber break-point ;
o Achieve end-to-end optical fiber identification;
o Complete mechanical splice point optimization;

Notes:
1,Users can use dust cap to protect the optical output port, to avoid the output end is exposed in the air to be polluted if not used for a long time;
2,After a period of time for using visible light , the optical output port may be adhered to the dirt inside of the sleeve, resulting in a decline of the output optical power , then the user could use cotton swabs with alcohol to remove the dirt, then with a dry cotton swab to remove traces;
3,Please take out the battery to avoid battery to be affected by damp if you do not use for a long time;
4,If there have other fault, please contact our company directly. In order to avoid more serious faults ,please do not open the instrument secretly to repair. For the instrument which secretly are disassembled or assembled, we will not repair;

Technical Parameters:

Warm Tips:   
We could produce the fiber optic visual fault locators per your needs or your design,we promise good quality & excellent design.