Standard configuration

1. Door Body: Special aluminum door profile
2. Glass: door leaf and exhibition box are 6/8mm transparent tempered glasses, curved wall is 10mm tempered glass (5 + 5mm arc safety laminated glass).
3. Drive device: two sets AC100- 240V, 50-60Hz, 0.2-0.6 KW.
4. Anti-interference device: function of preventing electromagnetic interference.
5. Central control computer: programmable logic control system, automatic and manual optional.
6. Speed control: the variable-frequency speed adjustment system ensures the door start, operate and stop smoothly.
7. UPS control box: when electricity is failed, UPS will start the middle sliding door.
8. Sensor: infra-red (radar) motion sensors, vertical rubber sensor defend pinching at entrances, anti-collision sensor at the bottom of door leaf, infra-red direct measure sensor defend pinching.
9. Emergency stop button: installed on the upright column at entrance right
10. Button for disabled : installed on the column of entrance right side, use for disabled people pass slowly.
11. Electric magnetic lock setting: it can automatically lock the door.
12. Status and fault display: display correct code of revolving operation or fault code.
13. Central fire pretection control device: the middle induction sliding door is connected with the fire alarm in the building , it will open quickly in an emergency and become an evacuation access.
14. Door leaf stop positions setting (optional): winter stop position, summer stop position, stop position of middle automatic sliding door, hold-open position, stop position of slow-down waiting, etc.
15. Reverse function of anti-pinching.

16. Function Introduction:

    Rotation checking function, emergency stop function, windbreak and dustproof function, central control function of fire protection, function of automatically open the middle sliding door, programmable logic control functions, trouble self-checking function, night lock function, access control function, frequency conversion function, speed adjustment, safety prevent bump or pinching , UPS function of emergency power supply (optional), switching function of door leaf stop position, waiting function for passing through slowly , reverse function of defend pinching, door leaf position setting .

    ￠	3600	4200	4800
    A	2200-2400
    B	2500-2700
    C	1670	1970	2270
    D	3600	4200	4800
    E	3770	4370	4970

17. Sensors:

           Door operation sensors(concealing) (infra-red):  4pcs

           Anti-clamp sensor(concealing) (infra-red reflection):  2pcs

           Anti-clamp sensor(concealing) (infra-red reflection):  2pcs

           Anti-clamp sensor(squeeze mode):  4sets

           Anti-clamp foot sensor(infra-red reflection):  2pcs

           Anti-collision sensor(infra-red reflection):  4pairs

           Buffer rubber  2sets

           Slow button   2sets

18. Optional:

    1. Surface treatment: stainless surface

    (mirror, hairline, titanium alloy), fluocarbon

    coating spraying, baking varnish.

    2. Central fire prevention control system

    3. Access control system

Technical data:

Supply power: AC 220V 50-60Hz

Power consumption: motor 200-600W, light 500W

Intelligent computer control

multilevel control system, frequency control of motor speed

safety device: 16A or 2×10A