DIMENSIONS (12500*2480*2700mm) 

STANDARD SPECIFICATION 

Main Frame: 
Opting for high tensile steel Q345B, welded by automatic Submerged-Arc processes 
500mm Height, Top Flange 16mm, width 140mm; Middle Flange 6mm; Bottom Flange 16mm, width 140mm, Side wall height: 600mm, Front Plate: 1200mm. 

1)Floor: 
Steel Sheet 3mm thickness 

2)Axle 
Three Units FUHE 13T 10 Hole axle or HJ 12T 10 Hole axle. 

3)Suspension 
A couple of FUWA(Brand) mechanical 3-axle suspension 

4)Leaf Spring 
Six sets of reliable local brand, 8-piece leaf spring, 16x90mm 

5) King Pin 
One unit of 2 Inch standard welded kingpin 

6) Landing Gear 
FUWA Brand 19", manually operating, heavy duty landing leg 

7)Wheel Rim 
13 units of 8.25*22.5 rim 

8)Tyre 
13 units of 11R22.5 Tubeless tyre , include one spare tyre.

9)Twist Lock 
12 sets ISO twist lock 

10)Spare Wheel Carrier 
One set of spare wheel carrier including a riser. 

11)Pneumatic Braking System 
Two unit of WABCO RE 6 relay valve; Four units of T30/30 spring brake chamber; Two units of T30 brake chamber, Two unit of reliable local brand 40L air tank; Two units of reliable local brand standard coppery air-connector. 

13)Electrical System 
One unit of JAEGER POWAY, 24V 7-pin ISO 1185 socket; Tail lamp with turn signal, brake light & reflector, side lamp etc. 

14)Painting Sand blasting processing clean rust 
1. Coat of anticorrosive primer 
2. Coats of finish urethane paint 
3. Color as customer choice 
15)Accessory 
One tooling box with whole set of standard trailer tool 

For the specification above, we reserve the right to make any changes without notice.