Detail:

Product advantage:
Sawtooth wave jigger is based on the theory of stratification of jig bed, and through development and improvement of the re-election of a energy-saving equipment on the basis of traditional jigger, jig fluctuation curve forms a sawtooth shape, so that the rising water faster than the falling water: short rise time, fall time is long; overcome the sine wave, ripple curve jig resulting increased, decreased flow and the action time of the same defect, enhances the bed looseness, alleviated the suction effect, the minerals in the heavy mineral grains are fully settlement, greatly improving the equipment selection than capacity and recovery rate.

The sine wave jigger contrast respectively: Sn 3.01%, W 5.5%, Pb 1.63%, Zn 2.04%; water consumption reduced 30%-40%, covers an area of reduced 1/3, and stroke can be adjusted. Due to the adoption of the electromagnetic adjustment motor drive causes the flushing time can be adjusted.Its performance can reach the domestic advanced level, is an ideal energy-saving gravity separation equipment

Product Feature
1.High capacity
2.High concentration ratio and high recovery
3.Fabricated with highest quality material
4.Easy to install, operate and maintain
5.The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
6.Saving water 30-40% than ordinary jigger
7.The pulsation speed very easy adjusted by regulator
8.Can achieve a good result

Technical Task