Wire mesh welding machine

1. This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composed of digital and integrated electric circuit. This operation is accurate, it has stable function ,firm welded point and without welded tracks.

2. Both line wire and cross wire are fed from coils.

3. This machine is equipped with precise equipment for weft cutting and position, so the length of wefts is identical and regular, it is unnecessary to slice the side.

4. Mesh pulling system adopts elastic tension link and opening positioning mesh, it is easy to regulate the mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly with range. Not only welding speed is fast but also it is easy to learn and operate. Only one worker can finish the operation.

5. The finished products can be in coil or in panel.

Parameter of wire mesh welding machine

Wire diameter:1.4-2.5mm

Welding aperture:50-200mm

Width:1200mm

Welding spot:25

Welding speed:45 times/min

Rated voltage:380V

Rated power:75KVA

Dimension:2.5*2.1*1.4mm

Weight:2.5T

Note: The specification may supply according to the customer request.

Auxiliary Equipment: Mesh Repairing Machine

Finished products & Application:

1. Mesh fence, casting roof mesh in the building

2. Construction (3d panel covered mesh, floor warmness preserving mesh, seedbed mesh, floor room mesh, animal cages)