Features:

 ♦ Steady filter rating

 ♦ Heat resistance

 ♦ Corrosion resistance

 ♦ Easy to wash and long life

Stainless steel sintered wire mesh can be divided into four kinds:

(1) Five layers of sintering net:

    Five different layers of stainless steel wire mesh are combined, and then sintered together through vacuum sintering, compressing, and rolling, forming a porous product.

(2) Perforated Sheet Sintered Mesh:

    It is sintered by punching plate and multi-layer stainless steel wire mesh. Due to the support of punching plate, it has the higher compressive and mechanical strength. It is mainly used in food, beverage, water treatment, dust removing, pharmaceutical, polymer, etc. It can be processed into various filters: tube, disc and sheet.

(3) Square hole sintered mesh:

    This type of mesh is sintered together by many layers of plain-woven square mesh. Owing to the large opening ratio, the sintered mesh possesses good permeability, small resistance but large flow. It is mainly applied to filter kinds of air and liquid.

(4) Stainless steel sintered filter mesh:

    It is overlapped and stacked up by 2 or 3 layers of plain dutch woven wire mesh with equal hole size, after vacuum sintering, pressurizing and rolling. It has the average pore size and steady air permeability. This kind of material can be widely used in powder transport, laboratory fluid bed, driers and coolers.