• Introduction

Calcium Powder/Cement Screw Conveyor for Silo is designed to transport bulk materials from one place to another. It can transfer powdery or granular materials in both horizontally and on an inclination. It is widely used in chemical, coal mine, grain, metallurgy industries. Material temperature must be lower than 200°C, with conveyor installation angle may reach up to 60°C.

 

• Working Principle

When the hollow axes with screw flight rotates along the jacketed trough, the bulk material feed into the trough and screw flight was hold back by the frication resistance acted on the wall of trough during running, the screw flight push the material and make the material do axial movement, simultaneity the material contact with the hollow shaft and jacketed trough full with cooling water and do heat transfer process. The cooled material can be discharged at the proper outlet at the bottom of trough or transport out at the end of trough.

• Technical parameters

 

Model		LSY 100	LSY 120	LSY 140	LSY 160	LSY 200	LSY 250	LSY 300		LSY 400
Screw Diameter (mm)		90	115	135	163	185	237	285		362
Rotation Speed (r/min)		300	300	300	308	260	200	170		170
Housing Diameter (mm)		108	133	159	194	219	273	325		402
Max. Capacity (t/h)		7	10	15	25	40	60	90		120
Max. Length (m)		8	10	12	15	18	25	25		25
Operating Angle (°)		0°~60°
Power (kw)	L≤7m	1.1	2.2	3	5.5	7.5	11	18.5	18.5
	L>7m	2.2	3	4	7.5	11	15	22	22

 

Note: When you inquiry to us ,please provide the following information , our engineer will help you select the most suitable Calcium Powder /Cement Screw Conveyor for Silo according to your specific requirements.  Thank you for your cooperation.

 

1. What is the conveying material and its physical characteristics? (such as bulk density, feeding size, temperature, mositure content etc.)

Material name:_______

Physical characteristics

Bulk density:___t/m³

Feeding size:____mm

Working temperature:____degree

Moisture:____

 

2. What is the processing capacity you are going to achieve?

Processing capacity:____(t/h or m³/h)

 

3. What is the inclination angle of the conveyor?

Inclination angle:__________degree

4. What is the conveying length?(the distance between the inlet and outlet)

Conveying length:_______m

 

• Feature

1.Totally-enclosed structure without causing any environmental pollution.
2.Construction available in mild steel and stainless steel.
3.Easy assembly and replacement of component parts.
4.Easy maintenance and low operating cost.
5.Multiple inlets and outlets