The floating fish feed pellet mill is necessary aquaculture equipment of making feed for pet fish, fish,shrimp,ricefield eel and others,also is a good choice for making feed for pet animals such as dog, cat,bird and others.

The floating fish feed pellet mill working principle:

After the material is sent into feeding device, they will be pressed by the screw shaft with high pressure
and temperature which makes the raw material fully cooked and sterilized.
Then the pressed material will be formed into pellets by shaping mould.
You can change different moulds to make pellets with different diameters.
After that the cutting device will cut the formed pellets into different length as required.
 
The floating fish feed mill features:

--The diameter of the feed produced by the fish feed pellet machine is from 0.9mm to 10mm by changing the moulds.
--The floating fish feed pellet machine can make feed for fish at different stage.
--The feed pellet produced by fish feed machine can be floating in the water for at least 24 hours.

• DGP series floating fish feed pellet machine is dry method, It isn’t with steam conditioner, 
  don’t need the steam boiler. Raw materials without conditioning before entering the extrusion system. 
  Our factory also is professional in the sinking type fish feed pellet machine with all kinds of capacity.

Main parameters:

Contact us freely pls !

Attn: Amanda Liu

Mobile:0086 18237112105

Skype:zzaixmachine

Email:zzaixmachine@sinoaix.com

http://www.zzaix.com