1. Product introduction

HL High-frequency vibrating screen with a high frequency . On one hand it destroys the surface tension of ore pulp and the high-speed concussion of the fine-grained materials in the sieve surface, on the other hand the high-speed oscillation increase the contact probability between materials less than separation granularity and the screen surface. Thus formed better separation conditions make the materials which particle size less than normal, especially the big proportion materials, sieved through into the next screen with ore pulp together. High-frequency vibrating screen enjoys many features such as reliable structure, strong vibrating, high screening efficiency, low noise, durable, easy maintenance and safe operation. It is widely used in the product classification like mining, building materials, transportation, energy, chemical land other industry .

1. Feature

1) Small volume, light weight, easy installment and movement, height can be adjusted freely.

2) High precision screening, high efficiency, can be applied to any powder, grain, mucus material.

3) High frequency up to 3,000 turns/min, sieving effect is more apparent on the fine-grained, high-viscosity materials.

4) Unique mesh structure and convenient installation work.

5) Except vibration motor, all parts are in all stainless steel, beautiful appearance and hygiene.

1. Applications

Excellent application for the dry material grading and serous fluid filtering such as chemical, food, medicine, non-metallic minerals, metallurgy, abrasives, ceramics, rubber, plastics, construction materials, coatings, paints, paper, petrochemical, military, environmental protection, urea, brewing and other industries.

1. Model

1. Notes

1) Power switch (not use knife switch) and ground wire should be ensure well contact, non-electrical power to run, otherwise it will cause the motor burning.

2) The machine should be placed in the distance 500mm around to avoid a collision.

3) fine mesh replacement method:

 Loosen the six plastic head nut, remove the upper hopper and network ring.

 the fine mesh should be placed on the network ring level up.

 making the circle tightening controlled by longing on pressed into the bottom of the annular groove and tighten.

 Repeat the above steps to tighten control pressed into the upper annular groove and tighten.

Use scissors to cut off excess mesh.

1. Maintenance

1) cut off the power when not in use.

2) non-rinse cleaning the motor to prevent leakage.

3) keeping the screen clean to get the best filtering effect, when cleaning screens, you don’t have to stop, you can according to the different filter material to use of appropriate cleaning agents, such as mud can be washed with water, but prohibited sharp hard colliding with the mesh.