Amphibious Sand Pump Working Range

Discharge Diameters 2″ to 22″ (50mm to 550mm)
Heads Range to 1,440ft (450m)
Flow Rate to 3,900gpm (2,000m3/h)

Amphibious Sand Pumps Application
The K Series Sand Pump has been gradually adopted by many large or middle scale mines and drainage enterprises in last 25 years.Some previous generations have experienced the application tests for dealing with exploded rock and discharging sand, and greatly shorten the drainage cycle. The pump acts as an important role at the moment when water and sand are bursting out.
The K Series Sand Pump can be used for various sand laden drainage conditions; High head, long service life, dealing with both water and sand, saving the operation cost!

Features
1. Long wear life for various sandy water(Common Material is 65Mn, YG8 as a choice)
2. Pump can still running well without water in period.( 5 houres off water had been tested).
3. As amphibious sand pump, can work on land or submersible( 2m for common, 80m Max).
4. Better design for Explosion prevention, more safty and higher reliability.
5. Side and Bottom suction pipes are much convenient for cennetion and installation.
6. Can handle with 20% sand in common, Max to 70% as required.

Feel free to contact us for additional info or for a free quote!