Working parameters

(1). Flow range 5~300m3/h

(2). Lift range 5~240m

(3). Diameter scope 25~200mm

Product overview

WQ series sewage pump is non-clogging sewage pump which is ssuccessfully developed basing on introducing advanced technology from abroad. It is the most advanced sewage disposal system equipment in domestic at present and featured with obvious energy saving effect, no pl ing, winding preventing, strong solids passing capability, automatic installation and automatic detection etc.

Product features

(1). Compact structure, convenient to move, use, and install.

(2). For especially adopt vortical and double flow impeller (high-lift pump adopts centrifugal impeller), this series pump has a strong drainage capacity.

(3). The motor is sealed with hard anti-corrosive ceramic of both single and double end faces, so, its impermeable effect is good, and it runs more safety and reliable.

(4). Adopting WQS water-filled pump of cold spacer type, it can be used to pump gronud effusion without immersed into liquid surface for a short time.

 

Product usage

(1). Business unit waster water discharge.

(2). Urban sewage treatment plant drainage system.

(3). The MTR, basements, air-defense systems drainage station.

(4). Hospital, hotel, high-rise buildings sewage disposal.

(5). Residential sewage pumping stations.

(6). Dilute slurry discharge in municipal engineerings and construction site.

(7). Water supply equipment in water plant .

(8). Farm sewage drainage and farm irrigation in rural areas.

(9). Exploration, mining and water-treatment equipment .

(10).Replace human labour to suck river mud.

 

Use condition

(1).The temperature of the medium is not more than 40°C.

(2).Medium ph value: 4-10, can not be used to pump high corrosive liquid.

(3). Medium solid volume ratio shouldbe under 20%, the medium density is 1200 kg/m3, kinematic viscosity is 7×10-7~23×10-6 m2/s.

(4). Based on the impeller's center, it should not be immersed into water for more than 5 meters .