Light ceramsite partition board is a new energy-saving wall materials, it is a shape like hollow floor like a wall, but it on both sides of male and female falcon groove, installed only when the sheet is erected, male, female falcon coated with a small amount of caulking mortar on the assembled together. It is by the river sand, light ceramsite (ceramsite particle size is generally used 0-4mm, 4-8mm and 6-10mm three), composed of fly ash, the mechanical pressure maintenance and. Light partition board has the advantages of light weight, high strength, multiple environmental protection, insulation, moisture, fire, breathing, fast construction, lower cost advantages of wall; his weight only solid brick 1/8, strength up to C7.5, thermal conductivity only solid brick 1/3, acoustic transmission rate is only 1/4, automatic solid brick adjust the indoor wall, saving the cost of the white points fifteen to twenty, improve construction efficiency three times to five times, it can be said of lightweight partition board technology has opened a new chapter of the comprehensive utilization of resources, with outstanding environmental significance. Edit the production requirements of this section of lightweight partition board

The project design unit or the construction contractor shall advance to the partition plate installed enterprise provides the wall layout and partition the relevant technical indexes in the construction drawing, includes the following content: 1 the type and axis selection of partition boards, wall thickness requirements, distribution and opening doors and windows size, location and slot size pipeline; 2 clear strip partition function to use, there is no water, hanging weights and measures; 3 prescribed fire, slat partition wall insulation index; 4 clear strip partition impact resistance, seismic function.

In order to ensure the engineering quality, engineering design unit shall board wall body building function, use the function put forward the basic requirements, the optimal performance index partition. Separating the interior space of a building wall. Partition is not load-bearing, general requirements for light, thin, with good sound insulation performance. There are different requirements for the partition rooms of different functions, such as the walls of the kitchen should have a fire resistance; partition the bathroom should have the moisture capacity of wall construction refers to the light wall installation, the wall material factory production, quick installation on site can rapidly improve production efficiency. To reduce the cost, promote the competitiveness of products.