JM-03DS  Full tutomatic crimping machine(Upgrade Version)

Features

The equipment using for absorbing pastern skin is close entirely like a funnel, and the whole pastern skin is absorbed into a flotsam box;

The device using for delivering and keeping wire straight is equipped a three-emitting cylinder, and it will not affect elasticity and bring on asymmetric length of the wire;
The servo retarder takes charge eduction, making the equipment run faster and more stable;

The control system adopts Q series up to date made by Mitsubishi,and that improves response speed of the equipment effectively;

The machine can provide different level to produce, so as to reduce deb ing time;

The speed is increased from 5200pcs/H to 6500pcss/H;

Specifications

Fxed cutting, one end crimping,the other end full/half stripping; The stripping length& cutting depth could be set up automatically.

 

Capacity             6500 PCS/hour (the shortest tangent)

Wire                AWG1007 16 # ~ 30 #

Cutting length         40mm ~ 9999mm The minimun size is in accordance with  the stripping length

Cutting accuracy       ± 0.1 mm (Design 0.005 * presidents)

Skinning length       1 side 10 mm    2 side 10 mm

Crimping ablity       19600 N (2 T)

Controlling           PLC control

Checking device       Low pressure & abnormal shut down detection

Power supply         AC200/220 V, 50, 60H 

Compressed air        0.5 Mpa (5 KGF/cm) about 200 nl/Min

Dimension           1140 W×670D×1400 H(mm)

Weight              450 kg