LED Fixture:

Model:                                    Green Lumen Pool Light S100

Main Material:                          316 Stainless Steel               

Type LEDs                              Bridgelux, (Cree Available)

Max. energy consumption         3*3W / 5*1W / 6*1W / 5*3W(RGB)

Color temperatures                 Daylight white (6500K)     Warm white (3250K)     Red     Blue    Green    Yellow

Light output                          40W halogen at 6500K

Protection class                      IPx8

Max. water temperature          40°C

Max. installation depth            10m

Dimesnions                           ø 100 mm x 10 mm

Cable length fixture               3m (2x0.75mm2)

Warranty                              3 years

 

LED Driver/Power supply:

AC input                         12/24 Vac or 100 - 240Vac

DC output                      24Vdc

Working temperature      -20°C to +40°C

Max. Cable length           100m. (2x0.75mm² cable)

Protections Short circuit/Overload/Overvoltage/Waterproof IP66/SE quivalent/

 

 SAFETY STANDARDS  

EN 55015:2006+A1:2007+A2:2009

EN 61547:2009

EN 61000-3-2:2006+A1:2009+A2:2009

EN 61000-3-3:2008

 

Simple Introduction:

High Power Extra Thin pool light.

1. Material : 10mm 304 Stainless steel with 1W / 3W High Power LEDs.

2. Input Voltage: AC 12V (safety voltage)

3. Projection angle rang: 25 degrees to 120 degrees optional, The body working operation temperature<65 degrees.

4. Color:  RED, GREEN, BLUE, YELLOW, WHITE  ,etc

5. Lifespan: More than 30,000 hours, Low power consumption, Environmental protection friendly.

6. IP protection: IPx8.

 

Advantage:

1. For our 4' spa light, we use the 316 stainless steel as its whole material.

2. 2 Screws for the whole installation

3. 8' are the normal size for USA and Eurpean Country.

4. The satin finish for the whole 304 stainless steel surface.

 

Best Quality:

1. We use the Bridgelux (Cree) ensure the Higher light intensity and longer Lifespan.

2. We equipped the customized driver which provide PAR56 with constantly electricity to make sure every single LED allocated the same current and under the rate current as well.