Professional easy removing graffiti without chemicals

Graffiti vandalism guard “CleverCOAT Pro anti-graffiti” is simple and safe product which warrants fine façade, long effective period for buildings and constructions

The building owner tries in first remove “mural painting “ by solvent. Solvent dilutes paint and brings it into material. There are spots and paint traces remain in surface. Even through graffiti is removed first time with good results, next time reach same results in removing “mural painting “ is almost impossible. Cleaning surface after graffiti in porous area seldom gets success result.

Removing anti-graffiti is always expansive and problematic. The best way to resolve this problem is prior protection of the facades and construction from graffiti vandalism with up to date chemical technology products.

Nanoformula factory produces in 2013 new type of protective coating “anti-graffiti” – water emulsion which creates on building’s and construction’s surfaces protective barrier layer. CleverCOAT Pro anti-graffiti is recommended for permanent protection from graffiti.

Product can be used both as separately and with pretreatment by water proof impregnation “Voka”.

CleverCOAT Pro anti-graffiti recommended for:

real and artificial stone;
concrete;
ceramics;
plaster;
bricks;
limestone and so on.

Features

- Product prevents to water absorption, oily liquids and paints (graffiti).
- Coating protects from spots and traces.
- Blocks sticking of a chewing gum.
- Protects against an atmospheric pollution.
- Impedes to spread of the moss and lichen.
- Prevents to destruction of the materials as results of freeze/unfreeze.
- Makes cleaning of the facades easer.
- Product is safe and non-toxic.
- Protects again UV radiation
- Doesn’t change color of a surface.
- Incombustible.

Emulsion “CleverCOAT Pro anti-graffiti” has an excellent adhesion both to smooth and pour surfaces
and also:

- Doesn’t react with surface material;
- Has no influence on the color substrate;
- Is APEO and solvent- free;
- Nonvolatile matter is 50% min;
- Emulsion is neutral however good resists to alkali and acids medium;
- Emulsion also contains small particle size with a narrow distribution range. Particles evenly are distributing in the surface without clothing the pours;
- CleverCOAT Pro anti-graffiti is contained nano silicon dioxide which increases emulsion spreading capacity and adhesion to substrate.

Coating

It can be applied in horizontal and in vertical surfaces and applicable for both outdoor and indoor works.

Recommended paint by brush, roll or sprayer. For pour surfaces use base emulsion, for smooth surfaces possible dilution up to 1:0.5 by water. How much dilution becomes clear in practice by testing in small area. Coating in surface becomes transparent after drying. Protected surfaces become hydrophobic.

Average consumption is 100g/m2
Drying time depends from ambient temperature and surface and may be in range 2-12 hours.

Properties of barrier protective coating

It is inert to substrate and fully transparent after drying.

Protected surfaces become hydrophobic. Water absorption is reduced in about one hundred fifty times. It allows to the materials of a substrate demonstrate the best application properties.

Lasting effect of a barrier coating not less 2 years. Recommended re-coat coating after this period or after removed graffiti.

Removing graffiti

Graffiti is removed with barrier film by hot water under pressure (for example with “Karcher”) or with brush. After removed barrier coating necessary re-coat.

Packing
CleverCOAT PRO antigraffiti is packed in 3 kg net canister. There are 4 canisters in tray. In pallet (120cm x 100 cm x 175 cm, gross weight 707kg): 54 trays/216 canisters Min. lot is one tray.
Working time: 2 yars from date of manufactured (in canister) in closed tare.