Description:

RT5372 2T2R 300mbps wifi adapter

Main Chipset: RT5372    

IEEE 802.11b/g/n compliance  

USB 2.0/1.1    

2.4GHz,ISM band  

Peak rate 300Mbps  

Built-in PCB antenna  

LED light shows link/activity     

WEP64/128,WPA,WPA2,802.11X,WMM  

WHQL;Cisco CCX Linux 2.6x;Mac OSX Windows CE,Winows 2000/XP/Vista/7

Unit Size:46x20x7.9 mm

 

Main Features

 1.2T2R mode,Built-in on board PCB antenna

 2.20MHz/40Mhz bandwidth

3.802.11b: 1, 2, 5.5, 11Mbps; 802.11g: 6, 9, 12, 24, 36, 48, 54Mbps ; 802.11n: Support PHY rate

Upto 300Mbps

4.Support Soft-AP,QoS-WMM,WMM-PS;Wifi-Direct

5.WPS button,LED indicates Wifi Link&activity

 6.Multiple BSSID support.

7.Power Management

 

Introduction:

 

The GWF-1C04 is a WLAN adaptor with USB Type A connector, it supports USB2.0 standards

interface. The GWF-1C04 WLAN adaptor is designed to operate in 2.4GHz frequency and fully complies with

IEEE 802.11b/g and 802.11n standards based on 2T2R MIMO technology.

 

A Ralink RT5372L MAC/BBP,RF/PA/LNA single chip is used to deliver high-performance of the latest Wi-Fi

technology, including software driver support for Microsoft Windows 7, Vista 32/64, XP 32/64, 2000, Mac OS X and

Linux.

 

            Specification

 

Main Chipset	Ralink RT5372L
Host interface	USB 2.0 Type A
LED	Link/ Activity
Antennas	One PCB Antenna,one rotatable antenna
Operation Frequency	ISM band , 2412~2483.5MHz (Depends on country region).
Typical Transmit Power	802.11b (CCK) 11Mbps: 18+/-1dBm
	802.11g (OFDM) 54Mbps: 15+/-1dBm
	802.11n (HT20atMCS7), 14+/-1dBm,(HT40atMCS15),14+/-1dBm
Receive Sensitivity Receive Sensitivity	802.11b: -88+/-1dBm; 802.11g: -73+/-1dBm
	802.11n (HT20), -71+/-1dBm;802.11n (HT40), -68+/-1dBm
Operation System	Windows XP/Vista/7; Linux 2.6.X; Mac OS X
Security	WEP 64/128, WPS;WPA/WPA2 (TKIP,AES); WAPI
Voltage Range/Current	DC 5.0V ± 5% / <300mA at802.11g
Physical Specification
Dimensions	46.0*20.0*7.9mm
Weight	5g