C hollow cone nozzle

【YBS Nozzle】offer C hollow cone nozzle and other products.Tel:86-0769-81609791

C hollow cone spray nozzle can be divided into 3 models, standard capacity C, medium capacity C and samll capacity C. The standard capacity models can produce hollow cone spray pattern with a fine atomization.Spray angles from 59°-84°.
Type C hollow cone spray nozzle can be used to air aerating, cleaning, evaporative cooling in spray ponds and cooling towers, If you want to know more information about YBS products, please contact us or log in our website.

Third, the hollow cone nozzle arrangement
????Round billet in the secondary cooling zone , there are four directions of nip rolls , the cooling water is injected into the surface of the round billet , only part of the evaporation heat , and the rest

Some direct fall , and some flow along the surface of the slab roller clamp , then leave the slab surface .
????Nozzles disposed generally use four or six , is determined according to the specific number of the radius of the round billet ejection angle of the nozzle , the whole covered all round billet

Cover, to maintain a certain spray distribution overlap.
????450mm round billet four weeks nozzle arrangement
????Nozzle spray angle : 90 °. The nozzle arrangement 4 , the nozzle height from the surface of the slab : 144mm; nozzles 8 are arranged , the nozzle from the surface of the slab

Height : 117mm. Nozzle angle : 70 °. 4 arranged nozzles, nozzle height from the surface of the slab : 277mm; arrangement 8 nozzles, nozzle

The height from the surface of the slab : 240mm.
????Round billet four weeks four nozzle arrangement , in order to facilitate the nozzle arrangement and installation of sprinkler piping nozzle and the nip roll axis perpendicular to the nozzle center

Located on the center line of the nip roll . From the point of view of heat transfer , not the best layout mode , reversing a 45 ° angle for the best mode, you can effectively

Six nozzle arrangement , the heat exchanger nozzle centerline down around compensation round billet round billet surface cooling water flow and heat conduction conducted nip roll folder located

Centerline roller surface around a center line on both sides of the center line of the nozzle configuration of the nip rolls around angle of 30 ° . From the point of view of heat transfer , the overall torsional

Turn 30 ° angle would be better. .、

Ordering information of C hollow cone nozzle(One-piece cast-type) (YBS brand)
Materials：None=brass
I=cast iron
SS=316 stainless steel
1/2 1/2C-3 1/2CI-3 1/2C-SS3
1/2C-4 1/2CI-4 1/2C-SS4
1/2C-5 1/2CI-5 1/2C-SS5
1/2C-7 1/2CI-7 1/2C-SS7

3/4 3/4C-5 3/4CI-5 3/4C-SS5
3/4C-6 3/4CI-6 3/4C-SS6
3/4C-7 3/4CI-7 3/4C-SS7
3/4C-10 3/4CI-10 3/4C-SS10

1 1C-7 1C-I7 1C-SS7
1C-8 1C-I8 1C-SS8
1C-9 1C-I9 1C-SS9
1C-10 1C-I10 1C-SS10
1C-12 1C-I12 1C-SS12
1C-15 1C-I15 1C-SS15

1-1/4 1-1/4C-10 1-1/4C-I10 1-1/4C-SS10
1-1/4C-12 1-1/4C-I12 1-1/4C-SS12
1-1/4C-14 1-1/4C-I14 1-1/4C-SS14
1-1/4C-16 1-1/4C-I16 1-1/4C-SS16
1-1/4C-20 1-1/4C-I20 1-1/4C-SS20

1-1/2 1-1/2C-16 1-1/2C-I16 1-1/2C-SS16
1-1/2C-20 1-1/2C-I20 1-1/2C-SS20
1-1/2C-25 1-1/2C-I25 1-1/2C-SS25
1-1/2C-30 1-1/2C-I30 1-1/2C-SS30

2 2C-30 2C-I30 2C-SS30
2C-35 2C-I35 2C-SS35
2C-40 2C-I40 2C-SS40
2C-45 2C-I45 2C-SS45
2C-50 2C-I50 2C-SS50
2C-60 2C-I60 2C-SS60

2-1/2 2-1/2C-60 2-1/2C-I60 2-1/2C-SS60
2-1/2C-70 2-1/2C-I70 2-1/2C-SS70
2-1/2C-80 2-1/2C-I80 2-1/2C-SS80
2-1/2C-90 2-1/2C-I90 2-1/2C-SS90
2-1/2C-100 2-1/2C-I100 2-1/2C-SS100