DMB-9004CI Four-Channel Professional Receiver is fully compliant with DVB-S/S2 standards, designed especially for multi-channel scrambled DVB headend services. It is able to receive up to 4 channels of DVB-S/S2 signals by Tuner/ASI port, convert frequency, demodulate and transport it into signal processor. The processor then descrambles, re-multiplexes and outputs with ASI or IP(GigE)(MPTS or SPTS optional) independently. The device supports real-time bit rate statistics and program information analysis for both input and output TS. DMB-9004CI is configured with up to 4 PCMCIA cards, which supports independent/cascading descrambling, and also (max.) 4 different multi-crypt and simul-crypt CAs. It is the ideal and professional Receiver for variety of DTV head-end system for operators and solution providers. |
MAIN FEATURES |
Fully compliant with DVB-S/S2 standards |
Abundant interfaces: 4*Tuner+4*ASI inputs, and 4*ASI+1*IP(GigE)+4*RF loopout output |
Up to 4 CAM cards, supporting max. 4 channels of TS(independent/cascading) / 32~48 programs' descrambling |
Support multi-crypt and simul-crypt of most main CA systems |
Input TS signals able to be re-multiplexed |
Support real-time bit rate statistics and program information analysis for both input and |
|
output TS |
Adopting LCD for monitoring the state of system and configuring the menu |
Excellent cut-off memory |
Integrated with user-friendly menu |
Easy and convenient to operate |
Remote monitored and controlled by NMS via Ethernet interface |
SPECIFICATION |
Transport Stream Input Interfaces |
DVB-S/S2 Input |
4*Tuner input+4*Tuner loop out |
Frequency range: 950~2150MHz; |
Standard: DVB-S/S2(EN 300 421 / EN 302 307) |
Constellation: (DVB-S) QPSK; |
(DVB-S2) QPSK/8PSK |
RF input level: -65~-25dBm |
Connector: 4*F-female, 75ohm impendence |
LNB power output: 0V/+DC 13V/18V, Imax=400mA |
ASI Input |
Connector: 4*ASI, BNC, 75ohm |
ASI mode: Byte |
Packet length: 188/204 Bytes |
Bit rate: 1.5~100Mpbs each |
CI Slot/CAM |
4*DVB-CI slots |
Interface type: PCMCIA Type II |
Standard: EN 50221 |
Interoperability: BISS I, BISS E |
Rate of descrambling: 72Mbps per CAM card |
Max. descrambling output bit rate: 280Mbps |
Descrambling mode: independent / cascading |
Capable of descrambling 32 programs simultaneously |
Support DVB simul-crypt and multi-crypt |
Transport Stream Output Interfaces |
ASI Output |
Connector: 4*ASI, BNC-Female, 75ohm |
Standard: DVB-ASI |
ASI mode: Byte |
Packet length: 188/204 Bytes MPEG-TS |
Bit rate: up to 100Mbps per output(70Mbps after descrambling) |
Mode: independent or redundant output |
Able to be configured to pass through output, descrambling output or matrix output |
TSoverIP Output |
Connector: 1*GigE, 100/1000 Base-T Ethernet, RJ-45 |
Protocol and TS format: UDP, 7*188 Byte |
Addressing: unicast or multicast |
Protocol: UDP, ARP, ICMP, IGMP |
Output modes: MPTS/SPTS |
GENERAL OPTIONS |
Control and Monitoring |
RS-232: for debug use only |
Software protocol: adopting SNMP protocol |
Support WEB/SNMP-based management |
LCD display and keyboard design on front panel for easy operation |
Physical and Power |
Voltage: 85~260 VAC, 50/60 Hz |
Consumption: 15 W |
Operating temperature: 5 ~ 45Centigrade |
Storage temperature: -25 ~ 85Centigrade |
Humidity: 10%~90% (non-condensing) |
Dimensions: 300mm(L)*483mm(W)*45mm(H)(1U) |
Weight: 5Kg |