3D printer filament PLA/ABS/PVA welding rods 

 

 

PVA ABS PLA plastic rod for 3d phototype printing  

 

 

1.Lower melting point and better smell than ABS, flow rapidly, not blocking the nozzle;

 

2.PLA Filament has small shrinkage even when printing big size model.

 

3.Dimensional accuracy ± 0.1mm with laser monitor and interlock device,smooth surface,no

 

bumps,no break,high hardness.

 

4.Wide colors seletion: natural,red,green,yellow,blue,black,purple,grey,orange

 

5.Packing: 1kg/1.5kg spool in plastic spool ( Can be customized)

 

Parameters as below:

 

PLA parameter 

 

POLYMER PROPERTIES	PLA COLOURED	PLA TRANSLUCENT
Print temperature	190-225 oC	190*220 oC
Raft temperature	190 oC	190 oC
First layer temperature	200 oC	200 oC
Print base material	MDF/Acrylic/PLA	MDF/Acrylic/PLA
Raft required	Optional	Optional
Filament diameter	3mm/1.75mm	3mm/1.75mm
Spool N.W	1kg/1kg	1kg/1kg

 

ABS parameter 

 

	ABS-H	ABS	ABS-M
Natural color	milk white	Milk yellow	Clear
processingtemperature	185 deg for 3mm,230 deg for 1.75mm,very goods process at 260deg for up printers	230 deg for 3mm/ 1.75mm, also can process at 260 deg for up printers	230deg for 3mm/1.75mm,also can process at 260deg for up printers
Odor	low smoke,tasteless, good for printing in door	white smoke,concentrated flavor,not very good for in door	Strong smell,not good printing in door
Roundness	±0.05mm	±0.05mm	±0.05mm
Variety	±0.1mm	±0.1mm	±0.1mm
water absorption	Very low,no bubbles occur when printing even expose toairforoverhalfayear	High,exposed to air for a period(like some days or shorter time)much bubbles printing at high temperature after the filament opened from seal packaging	High,easily absorb moisture,much bubbles when printing after expose to air for a short time
Surface gloss	normal	Good	Good
Strength,hardness	Low,easily white dot when bending	Strong no white dot when bending	Low,somet ime white dot occur when bending
stick to layer within layer	very good	Good	Good
stick to heat bed,heat bed 110 deg	normal	Good	Good

 

 Strict Quality Control:

 

Production procedure

 

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

 

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

 

III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg

 

IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

   

Quality Control

 

 I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

 

II.keep each record filament samples sent to customers, build a tracking able document.

III.when the filament put on shelf longer than half a year, we will dry the filament again.

 

 

 

CONTACT:   SKYPE: KINGJET08