J-ECO FLAG NANO NF-60

 

ENVIRONMENTALLY-FRIENDLY NANO DISPERSED DYE DIGITAL INK FOR SUBLIMATION AND DIRECT PRINTING

J-Eco Flag Nano NF-60 digital inks are ink-jet printing inks especially designed to be used on digital printers having piezo printing heads. J-Eco Flag Nano NF-60 are suitable both for direct and sublimation printing on polyester fabrics or mixed synthetic fabrics, containing polyester in a min. quantity of 60%. In the sublimation process, the image is printed on coated paper and then transfered on the fabric with a heat press or calender.
Direct printing process, instead, allows direct printing onto the fabric and then a subsequent process of  thermofixation.

For application on different material such as polyammide, the transfer or thermofixing temperature varies according to chemical-pysical characteristics of the substrate to be printed. For instance, the plastic sheet used in skis and snowboards manufacturing are transferred at 170-180 °C for 90/120 seconds.

 

ECOCOMPATIBILITY
Free from Alkylphenolethoxylate (APE) according to the EC Directive 2003/53/CE issued on June 18,2003.
APE is a chemical product included in the EDC (Endocrine Disrupting Chemicals) list of substances.

 

 

 

ECOCOMPATIBILITY

Free from Alkylphenolethoxylate (APE) according to the EC Directive 2003/53/CE issued on June 18,2003.
APE is a chemical product included in the EDC (Endocrine Disrupting Chemicals) list of substances.

 

 

 

MAIN FEATURES

• Innovative Nanodot Technology
• Vibrant and bright colours
• Very good shelf-life
• Optimal ink fluidity and printability through piezo-heads
• Excellent image definition in direct printing and transfer as well

• Very good fastness properties

 

 

 

Applications

- Printing on polyester and polyammide (nylon) fabrics used in sportswear and outer wear in general
- Printing on mixed synthetic fabrics (min. 60% of synthetic fibres) used in sportswear and outer wear in general
- Printing on polyester and polyammide banners and flags on treated and non-treated fabrics

 

 

Transfer and Thermofixing Conditions

• Transfer conditions can vary from 30 to 60 seconds for 180°-210 °C according to the type of substrate
• Thermofixing can occur by means of a press or calender. The thermofixing temperature and time varies according to chemical-physical characteristics of the substrate to be printed.

 

Available colours and type of packing
- 100C    Cyan
- 101LC  Light Cyan
- 102B    Blue
- 105CT Turquoise
- 200M   Magenta
- 201LM  Light Magenta
- 203O   Orange
- 300Y    Yellow
- 400K    Black
- 401GY  Grey
- 403HK  High Black
- 405AK  Absolute Black
- 250FP  Fluo Pink
- 350YP  Fluo Yellow