The RemoDAQ-8324 is a 12-channel Universal Input/Output module. There are 4 analog output, 4 digital input and 4 digital output channels. 

RemoDAQ-8300 Ethernet-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. Through standard Ethernet networking, RemoDAQ-8300 retrieves I/O values from sensors, and can publish them as a real-time I/O values to networking nodes via LAN, Intranet, or Internet. With Ethernet-enabled technology, RemoDAQ-8300 series modules build up a cost-effective DA&C system for Building Automation, Environmental Monitoring, and Facility Management and Manufacturing applications. 

Features

1.3.1 General Introduction
Support 10/100M Ethernet
Support Modbus/TCP 
Input Voltage:+10V~+30VDC
Power Consumption:1.9W
Temperature:-20 Degree~70 Degree
Humidity:5%~90%,Non condensing
Isolation:3000VDC

1.3.2 Analog Output
Channel:4
Input Type:mA,V
Accuracy:+-0.1% FSR
Resolution:12 bit
Zero Drift:Voltage Output +-30uV/ 
Current Output +-0.2uA/ 
Voltage Output:Max 10V 
Current Load Impedance:External 24V:1050 ohms 

1.3.3 Digital input

Channel:4
Dry Contact:
Logic Level 0:Ground
Logic Level 1:Open 
Wet Contact:
Logic Level 0:0 ~ 3 VDC
Logic Level 1:10 ~ 30 VDC

1.3.4 Digital Output
Channel: 4
Output Type:open collector, sink mode,MAX 30VDC 100mA