Self-aligning ball bearing product features
Mainly bear radial load, and at the same time can carry small axial load.Shaft (shell) axial displacement limit within the clearance limit, with automatic self-aligning properties, allowed inside and outside under the condition of relatively little inclined to work properly, is suitable for bearing seat holes can't strictly ensure the alignment of parts.
Self-aligning ball bearing product characteristics
Self-aligning ball bearing with two structures of bore cylindrical or tapered and retainers made of steel sheet or synthetic resins.The bearings are characteristic of their way into spherical shape, have so can compensate concentricity and deflection errors, but which shall not exceed 3 degrees between inner ring and outer.
Self-aligning ball bearing structure
With dust cover with seals and self-aligning ball bearing assembly has fill in the right amount of grease, before installation should not be heating also don't have to be clean, without lubrication, in use process to adapt to the operating temperature - 30 ℃ to + 120 ℃.Self-aligning ball bearing main use: is suitable for precision instrument, low noise motors, automobiles, motorcycles and general machinery, is the most widely used type of bearings in machinery industry