Description:

◆GSM network, can be used wherever there is cell  phone coverage      

◆ Panel compatibility  - Allows any contact ID alarm panel to transmit alarms using the GSM voice channel
◆Telephone line backup: Uses the telephone line as the main transmission line and uses the GSM voice channel as backup   

for more detail, welcome to visit jctechgr dot com

Main features:

◆GSM network, can be used wherever there is cell  phone coverage      

◆ Panel compatibility  - Allows any Contact ID alarm panel to transmit alarms using the GSM voice channel
◆RJ11 port, telephone line backup: Uses the telephone line as the main transmission line and uses the GSM voice channel as backup            

◆Auto restart system: It can continuously monitor the system status.
◆Programmable Account Number:  Send additional systems state (with user programmable Account number) to the monitoring station.
Supported Protocol: Pager message (DTMF with handshake)                      

◆ Sends text messages to programmable cell phone number (SMS) to notify the user that the PSTN line has been cut off or unavailable.

◆Arm/disarm the unit remotely via remote control, SMS or phone call, it also can connect to the basic telephone to perform arm/disarm.
◆Three digital inputs zones: Trigger when short circuit.                                                                  

◆Support 8 phone numbers, and each zone input can choose to make alarm call or not, alarm by SMS or not.
◆Three remote control outputs: (Sink max 300mA per output) can switch on lighting, air conditional, generator, sensor or other equipment remotely through a SMS or phone call.           

Parameters:

﹡Rechargeable battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply.       

﹡Low power consumption - uses 30mA while in idle state and 260mA when transmitting an alarm
﹡Working frequency: GSM900MHz/GSM1800MHz
﹡Stability of frequency: better than 2.5PPM
﹡Signal sensitivity: -103dBM
﹡ Transmit power: <2w
﹡Power: 220v±15% AC
﹡ Input Voltage Tolerances: 1~20VDC
﹡The max distance between terminal and telephone: 100M
﹡Environment temperature: 0~+50℃
﹡Relative humidity: 10%~95%
﹡Air pressure: 86~106kpa

Standard packing: