Specifications

suitable for pumping and spraying the wet ready mixed mortar with strong adhesion and more than 0.5Mpa high pressure.
 

TH-P5 mortar spray machine

Performance characteristics

1. Good quality: more than 0.5Mpa high pressure, strong adhesion

2. Simple structure and convenient operation: Screw pump driven by a variable speed gear box, delivery output can be adjusted by hand, easy to operate.

3. Fast speed and High efficacy: the machine can work continuously for the output 1.5~2m ³/hour (fluctuate according to the material).

4.Labor and cost saving: mechanical spray plastering save about 2/3 labor number than manual operation; in addition, due to shorten the construction period, it also can reduce the 35%-50% fees for the use of other mechanical; totally construction cost can be reduced by about 30%.

5. Easy to clean and maintain: because the structure is simple, only needs to guarantee the pipeline smooth and lubricating, generally no failure according to the correct operation method.

6. Material and equipment saving: mortar transported mainly by handcart and crane, according to the actual construction experience, at least more than 5% mortar fall to the ground in the transport process; in addition, it can save a layer of cement paste when spraying on ceiling; the aerated concrete wall can be directly sprayed gray, eliminating the external wire mesh or a DG glue.

Technical parameters