The Side board production line is a full-automatic production line. The production line is used for the joint-body production of front, back side board and U shell board. It is mainly composed of feeding machine, punching machine, 180-degree flip tipper, roll mill, side bending machine, U-shaped bending machine and accessory pneumatic system, hydraulic system, electric control system and other components. Based on needs of each machine, it can have any combination to accomplish the fixed-size sheet automatic feeding, punching and trimming blanks flip, roll forming, both ends bending, U-shell bending, baiting and other processes. The line has the advantages of reasonable technology layout, high production efficiency, high level of automation, safe and reliable human-machine interface operation, easy maintenance, and can be adapted to the wide range of products.

General Technical Data
Outer dimension:32000×3500×2000mm（L×W×H）
Working surface height: 900mm above the ground
Station: 6
Finished product size range:
Length x width x height =(1000~1800)x(500~700)x(700~800)mm
Cycle time: 35s/set
Board material: cold rolled plate，pre-painted plate or PCM with film
Board thickness: 0.45~0.55mm
Total power: ～30Kw
Total air supply: ～2m3/h (0.5Mpa)
Industrial water: ～10 m3/h