High Hardness Zirconia ZrO2 Ceramic Rods Tubes Bushings Sleeves

1.Material: ZrO2 Ceramic, Zirconia Ceramic, Zirconium Oxide

2.Product Feture:

• High density
• High strength and fracture toughness
• High hardness and wear resistance
• Low thermal conductivity (20% that of Alumina)
• Good chemical resistance

Zirconia is most famous high-performance material among all oxide ceramics. Ceramic components made out of Zirconia generally consist of Zirconia as basic material doped with some percentage of other oxides like Yttria (Y2O3) or Magnesia (MgO). Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "ceramic steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.

Common applications of Zirconia ceramics include extrusion dies, wire and pipe extension, guide and other wear rollers, pressure valves, and bearing materials.

Ceramic Manufacturing Process
Raw Material >>   Milling/Mixing >>   Spray/Drying >>   Forming >>   Green Machining >>   Sintering  >>   Grinding >>   Special Process >>   Inspection >>   Cleaning >>   Final Product

Application

• Precision ball valve (balls and seats) Pump seals, valves and impellors
• High density grinding media
• Oxygen sensors
• Threadguides
• Fuel cell membranes
• Cutting blades
• Radio frequency heating susceptors
• Medical prostheses
• Metrology components

About UniPreTec
UniPreTec provides high-performance ceramic products in Alumina, Zirconia, Zirconia Toughened Alumina, Silicon Carbide, Silicon Nitride and  further special materials. Along with these materials, we offer several machining from which to choose such as cutting, drilling, sawing, turning, grinding, polishing etc.. Furthermore, our technologies and equipments allow us to provide various and flexible forming processes, like dry pressing, isostatic pressing, extrusion, injection moulding and slip casting.