Model: | - |
---|---|
Brand: | BD |
Origin: | Made In China |
Category: | Industrial Supplies / Tools / Hand Tools |
Label: | lug nut wrench , torque multiplier , TRUCK R.V. BUS LUG N |
Price: |
-
|
Min. Order: | 300 pc |
Labor Saving Easy Lug Nut Wrench Torque Multiplier Truck Trailer RV 5000 N.M HD
Torque Multiplier Heavy-Duty Lug Wrench Replaces 1" Air Impact – WARRANTY
Product Features:
● 7pcs socket:24、27、30、32、33、36、38mm (Socket Length 75mm)
● Max. torque:3,200 N.M
● Gear ratio 1:58
● Square driver 1"
● Labor Saving Wrench is a newly designed wheel wrench for easy?loosen?truck tires lug nut or car tires by using less labor to reach a sufficient output torque with out impact or Compressor need.
● The wrench can be used to disassemble various kinds of truck tires the easy way.
● These are all 1 inch drive sockets, but any 1 inch socket will fit the output shaft of the wrench.
● Put the sleeve onto the square head of the handle end and the rocking bar on the other end.
● When the sleeve is put on the net to be disassembled or fastened pay attention to the direction of loosening an tightening . Roll the rocking bar so that the handle is against the side of another bolt tightly.
● After the nut is unscrewed use the long bar to disassemble quickly. (First use the long bar to screw on quickly and then use labor saving wrench instead during tightening)
Labor Saving Easy Lug Nut Wrench Torque Multiplier Truck Trailer RV 5000 N.M HD
Torque Multiplier Heavy-Duty Lug Wrench Replaces 1" Air Impact – WARRANTY
Product Features:
● 7pcs socket:24、27、30、32、33、36、38mm (Socket Length 75mm)
● Max. torque:3,200 N.M
● Gear ratio 1:58
● Square driver 1"
● Labor Saving Wrench is a newly designed wheel wrench for easy?loosen?truck tires lug nut or car tires by using less labor to reach a sufficient output torque with out impact or Compressor need.
● The wrench can be used to disassemble various kinds of truck tires the easy way.
● These are all 1 inch drive sockets, but any 1 inch socket will fit the output shaft of the wrench.
● Put the sleeve onto the square head of the handle end and the rocking bar on the other end.
● When the sleeve is put on the net to be disassembled or fastened pay attention to the direction of loosening an tightening . Roll the rocking bar so that the handle is against the side of another bolt tightly.
● After the nut is unscrewed use the long bar to disassemble quickly. (First use the long bar to screw on quickly and then use labor saving wrench instead during tightening)
Yuhuan Haiyi Machine Factory | |
---|---|
Country/Region: | Zhe Jiang - China |
Business Nature: | Manufacturer |
Phone: | 15214790437 |
Contact: | Judy (Gerneral Manager ) |
Last Online: | 01 Apr, 2014 |