Product Specification
Switching rating(Switching)： 25mA  24VDC
Switching rating(Non-switching)： 100mA
Contact resistance(initial)： 50mΩ Max
Contact resistance(after test)： 100mΩ Max
Insulation resistance： 1000mΩ Min.at 500VDC
Dielectric strength： 500VAC.for 60 seconds. 1mA
Capacitance between adjacent switches： 5PF Max

Mechanical Specification
Operating temp： -25℃～＋70℃
storage temp： -40℃～＋85℃
operation force：  8N  Max.
Mechanical life：  2000 operations
Vibration： Per  GJB360A-96
Solder ability： After flux 230±5℃for 5±0.5seconds,95%coverage
Resistance to soldering heat：260±5℃ for 5±1seconds

Material Specification
Cover:：engineering plastics (black)
Bottom:：engineering plastics (black)
Pins:：copper alloy plating solution 
Kays：Nylon (White)

Soldering And Cleaning Processes:

1.Keep all switch contacts in their"OFF" position for all operations.
2.Wave Soldering: Recommended solder temperature at 260℃ Max. 5 seconds. 
3.Hand Soldering: Use a soldering iron of 30 watts controlled at 350 ℃ approximately 5 seconds. While applying solder. 
4.Reflow Soldering Profile:Reference.
5.Cleaning Process:Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excelled results, when vapor methods are used don't subject the switch to solvents at temperature above 51 ℃.
Packing:
All DIP switches are shipped in standard IC tube.
 

SMT type can be shipper in tape or reel packing.
The quantity is 1000pcs/reel.