~Introduction&Application:

Rain  test  chamber  simulates the watet drip environment to test the water resistance and sealing of the samples during storage, transportation and usage. It is widely applied to electrical and electronic products, lamps and lanterns, electrical cabinet, electrical components, automobile, motorcycle and its spare parts and other products. It provides the basis to improve the performance of the products.

Feature:

1. Meet the requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test.

2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line.
3. Can manual default the test parameters, complete testing automatically shut off the water supply and pendulum pipe angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.

4. Use Mitsubishi /siemens PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell.

5. Servo drive mechanism, guarantee the pendulum pipe angle of precision, the overall pendulum tube structure for hang a wall.
6 Best after sales service: One year free parts maintenance.

7 Customization is available & welcomed.

Technical parameters: See the label.

Except Water pouring test device IPX3 level, Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:

Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

Specification
Model DH-500 (IEC-529)(CNS14165)
 Internal Dim.WHD(mm) 700×800×900 
 External Dim.WHD(mm) 1000×1100×1200 
 Water Temp. Normal Normal

Spray Type 
Total water
 flow(L/min) R1 1.8 IP×1 With in 1--1.5mm/min(In drip box)
  R2 3.2 IP×2 With in 3--3.5mm/min(In drip box)
  S1 24.5 IP×3 angle±600,R:400mm,1.1L/min
  S2 39.2 IP×4 angle±1800,R:400mm,1.8L/min
 
Preesure of
spray nozzle
(kgf/cm 2 ) R1 0.1 1.Flow rate of the water=0.07L/min
2.IP×3,Radius:400mm,Number or open holes=16,total water flow:1:1L/min.
3.IP×4,Radius:400mm,Number or open holes=25,total water flow:1:8L/min.
*Radius:200mm,R400mm.(For IP×3,IPx4)
  R2 0.3 
  S1 1 
  S2 3 
(RPM)Test Specimen Frame 17RPM 1RPM

   Spray Nozzle Rotation Speed 23RPM 
Swing 60°from vertical for 4 seconds at one time

Swing 180°from vertical for 12 seconds at one time

   Material  Interior SUS#304
  Exterior 
 Other Components Chamber lamp.Wiper
casters with Adjusters Chamber lamp.Wiper,casters with Adjusters
 Power Source[K.W] AC 1Ψ 220V 60/50Hz 4KW