SHURE BETA52A Drum microphone

Supercardioid Dynamic Microphone for Kick Drum and Bass Instruments

1.Features

Frequency response shaped specifically for kick drums and bass instruments

Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum

Studio quality performance, even at extremely high sound pressure levels

Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise

Hardened steel mesh grille that resists wear and abuse

Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration

Neodymium magnet for high signal–to–noise ratio output

Low sensitivity to varying load impedance

Legendary quality and reliability

2.Specifications

Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL
Impedance Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z
Phasing Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Maximum SPL 174 dB at 1000 Hz (calculated)
Connector Three-pin professional audio connector (male XLR type)
Housing: Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread