Pulse and Oxygen Saturation Module

 

FEATURES:

• Small, flexible and easy setup, with high reliable and accurate readings.
• Provide quick, accurate measurement of Spo2 and pulse rate.
• Adopt advanced digital signal processing technology enhances performance during low perfusion and motion interference.
• By comparing invasive clinical test of precision withCO-OXIMETERto ensure clinical monitoring precision.
• Available for Adult, pediatric, and neonatal patients.
• 3.3 volt Single-Supply, low-power design.
• Plethysmographic waveform and pulse amplitude blip bar displays.
• Easy serial ports connection, which is ease of integration.
• Ensure a precise measurement during poor perfusion (see Simulator P10.075).
• Ensure a precise measurement under the defined 13 motion conditions of Simulator.

 

 

1 Function

   1.1 Calculation：

    SPO2 and pulse rate calculation

   1.2 Measurement Unit

    SPO2    ％

    Pulse rate          BPM

   1.3 Serial port

   RS232 Port，TTL level，9600 Baud

2 Performance Indicators

   2.1 Measurement range

       SPO2: 0-100%

       Pulse rate: 30-245 beats/Min (BPM)

  2.2 Resolution Value： 

       SPO2: 1％

       Pulse rate: 1 bpm

  2.3 Accuracy

       SPO2:±2% （70-100%）; undefined below 70%

       Pulse rate: ±3 bpm（30-245BPM）

 

3 Physical Characteristics

    3.1 Length： 21mm

        Width： 15.3mm

        Height： 3mm

   3.2 Weight： (undefined)

   3.3 Assembly：

    Adopt sticking technology, two-side welding, by using bonding pad with standard 2.54mm interval.

 

   3.4 Port connection definition:(Figure 2)

   3.5 Application Circult:(Figure 3)

4 Electrical

Input voltage： 3.3V DC ± 10 %

Operation current(measurement)：Average current < 40mA，instantaneous current of LED radiation < 200mA.

 

5 Accessories

Adult finger-clip SpO2 sensor

Adult finger-tip SpO2 sensor

Pediatric finger-clip SpO2 sensor

Pediatric finger-tip SpO2 sensor

Neonate finger-tip SpO2 sensor

Neonate wrap SpO2 sensor

Adult/pediatric disposable SpO2 sensor

Infant disposable SpO2 sensor

Neonate disposable SpO2 sensor

 

6 Environmental

   6.1 Temperature

 Operating temperature：0 to 45℃

     Storage temperature：-20 to 55℃

  6.2 Temperature range

     Operating：30-95%

     Storage：10-95%

 6.3 Operating altitude

     -500-5000m

 6.4 Service life

 10 years for mainboard

 

7 Conform to the following standards

    IEC 60601-1-2

    EN ISO80601-2-61

8. Port Communication Protocol

8.1Port communication setting：

    Data format：start bit + 8 number bits + 1 stop bit, no odd verifying Baud rate：9600 bps

8.2 Data sent from module to host compute：

  The first sent data package refers to pulse rate and SpO2

      0xFF,0xFE,0x09,checksum,0x23,0x95,byte0,byte1,byte2,byte3,byte4.

  The first sent data package refers to plethysmographic waveform

      0xFF,0xFE,0x18,checksum,0x23,0x96,byte0,byte1,byte2,byte3,byte4,

      byte5,byte6,byte7,byte8,byte9,byte10,byte11,byte12,byte13,byte14,

      byte15,byte16,byte17,byte18,byte19

  More detail definition of each byte can be referred to the internal communication protocol of our company.