coating thickness gauge

Two measuring methods of paint coating  thickness gauge: magnetic induction (F) and eddy current (N)

• 6 types of probes are available for various applications
• 2 measurement modes: continuous / single
• 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
• Memory up to 495 readings
• Direct testing mode and block statistics mode (APPL/BATCH)
• Direct print out of statistical values
• Data view for connecting with PC is available
• Low battery indication

       Two switch off modes: manual and auto

• 6 types of probes are available for various applications
• 2 measurement modes: continuous / single
• 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
• Memory up to 495 readings
• Direct testing mode and block statistics mode (APPL/BATCH)
• Direct print out of statistical values
• Data view for connecting with PC is available
• Low battery indication

Two switch off modes: manual and auto

Technical Specification

Measuring range Refer to the table below

Probes available      

Tolerance    

Minimum resolution:

Measuring condition 

Operation language   English

Standards    DIN, ISO, ASTM,BS

Calibration   Zero and foil calibration

Statistics     Number of measurements, mean, standard deviation,maximum and minimum of 3000 readings

Data memory      495 readings

Limits    Adjustable with alarm

Interface      RS-232

Working temperature 0-40°C

power supply      Nicd rechargeable batteries 1.25V

Dimensions  270mm×86mm×47mm

Weight   Approx. 530g

 

 

Optional probes and technical specification

Probe model       F400      F1   F1/90º   F10 N1   CN02

Operating principle    Magnetic induction    Eddy current

Measuring range (µm)      0-400     0-1250   0-10000 0 to 1250 μm0 to 40μm (for chromeplate on copper)       10~200

Low range resolution (µm)      0.1  0.1  10   0.1  1

Accuracy     One-point calibration (µm)      ±(3%H+1)    ±(3%H+10)  ±(3%H+1.5) ±(3%H+1)

       Two-point calibration (µm)      ±[(1~3)H%+0.7] ±[(1~3)H%+1]     ±[(1~3)%H+10]   ±[(1~3)%H+1.5] -

Measuring conditions       Min curvature of the min area (mm)     Convex  1     1.5  Flatten  10   3     Flatten

       Diameter of the min area (mm)      φ3   φ7   φ7   φ40 φ5   φ7

       Critical thickness of substrate (mm)   0.2  0.5  0.5  2     0.3  unlimited

                   

                                                                   

Standard delivery

      Main unit

Calibration foil set

Substrate

Charger

Probe

Instruction manual

TIME certificate

Warranty card