Brief introduction

It puts the grinder underside, live link, reasonable process, compact structure, very suitable for medium-sized cultivation companies and small-scale aquaculture feed processing plants. 

1. It is setting crushing and mixing equipment, after crushing feed automatic into mix step.

2. The raw material can be grain, corn, soybean, wheat, etc., and the special feed can be added into the machine to mix.

3. Suitable for the family use and small factories.

4. This mixer machine possesses lower consumption, less area of occupancy, easily to loading and discharging, but long mixing time.

5. Animal Feed Set 9HT1500 Poultry Feed Set has residual quality in the end or the bottom, generally used for small feed factory and complete feeding line. Each batch of feed mixing needs about 20min.

Advantage of the machine

1. It can be used to grinder and mixer at the same time. Low input and high return.

2. It can suitable for livestock, poultry and aquatic product to produce feed.

3. The raw material can be maize, corn, wheat and rice husk and so on.

4.  High Capacity Small Sheep Feed Set with single-phase motor, low noise, suitable for 220v’s voltage. Suitable for individual professionals and small-scale aquaculture feed processing.

Avoiding “mixing” problems

♦The mixer should not be overloaded. Overloading the mixer will cause some of the feed to float above the mix and not blend properly.

♦Improper mixing can also occur if the tolerances between the mixer bars and the sides of the mixer are not set properly.

♦Mixers should be visually inspected periodically. Establish a set schedule for inspecting the mixer. Worn paddles and ribbons should be replaced.

♦Do not deviate from proper mixing times. If possible have mixing time controlled by a timer.

♦Mixing time increases with the level of liquid feed added to the mix. This is because the mix becomes more viscous, slowing down the flow of ingredients through the mix.

Technical data of this machine