Description

100M Ethernet Media Converter is the network communication device that extending the Ethernet transmission distances up to 120Km over the fibre optic cable, it can convert 10Base-T, 100Base-T Ethernet electric signal to 100Base-FX optical signal.

100M Ethernet Media Converter completely conforms to 10Base-T, 100Base-TX, 100Base-FX and IEEE 802.3x standards, and compatible with Network Card, Repeater, HUB and SWITCH, provides low-cost, high-reliability solutions for broadband special network and fiber metropolitan area network.

Features

1. Supports SNMP management (only for management device)

2. Enable/Disable optical link-loss alarm function

3. Four transmission modes are selectable

4. Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard

5. Comply with IEEE 802.1Q VLAN protocol

6. Support 10/100M, Full/Half duplex auto-negotiation

7. Support MDI/MDIX autosense

8. Support transmission distance of up to 120km (Dual-fiber)

9. Support over-size packets of up to 1600 Byte

10. Support hot-swappable

11. The cards work as standalone and rack-based Media Converters

12. Single-fiber and dual-fiber devices are available

Technical specification

Interface:

>Standard:IEEE802.3 802.3u

> Auto-negotiation on half/full duplex mode, 10/100

   dual speed and MDI/MDI-X

> Wavelength: SM 1310nm/1550nm MM1310nm

> Optic connector:SC, Bi-Di, LC, or ST can be selected

> Transmission distance: SM 20~120Km;MM 2Km

Others:

> Power supply:

  90~240VAC 2.5W (for stand alone style)

> Operation temperature:0~50°C

> Humidity:10%~90%RH(non-condensing)