The frame is entirely welded with steel plates and treated to relive stress by tempering, so the precision is well maintained. 
Hydraulic top-drive, stepless pressure adjustment and high quality sealing rings imported from overseas to ensure the machine tools reliability. 
Mechanical synchronous mechanism and the complex compensation are designed so as to raise the workpieces precision.(the convex structure for the table above 160T) 
The stroke and distance of the backgauge is adjusted by the motor and is well adjusted by hand, the adjustment is displayed by digital meters. 
Inch,single,continuous operation mode being designed for the machine and reversing and maintain time can be controlled by the time relays. 
Safe fence and the electric interlocker have been designed for the machine to ensure the operation safely.(the back of 40T and above 200T without safe fence) 

1        Normal pressure        800KN 
2        Length of worktable        2500mm 
3        Distance between uprights       2050mm 
4        Throat depth        250mm 
5        Ram travel        120mm 
6        Max open height between working table surface and ram      370mm 
7        Adjustment to ram trap        80mm 
8        Speed of ram travel      No load        80mm/s 
           Full load        10mm/s 
           return        70mm/s 
9         Axial plunger pump        type     25MCY-1B 
            flow       25ml/r 
            pressure        32Mpa 
10        Main motor        type        Y160M-4/B35 
             power        7.5KW 
             speed        1400rpm 
11        Motor for adjusting ram        type       WPDS40/B14 
             power        120W 
             speed        1440rpm 
12        Motor for adjusting back 
             type        YU80M6B 
             power        0.5KW 
             speed        930rpm 
13        Overall dimension        Length        2560mm 
             width        1300mm 
             height       2220  mm