Spec:

Power: 110V/220V AC 60HZ/50HZ

Size: L940x W560 x H370mm

Weight: 50kgs

Features:

(1)Any S.M.T.D.PC board (base board) with V-CUT is appropriate for this machine. This machine is especially suitable for the cutting of Aluminum base board and FR-4 (e.g. light bar and so on).

(2)Operating motor optimizes drive separation velocity : 300/500MM/SEC.

(3)Keep the board stable when cutting the board. The upper circular knife moves from side to side, which guarantees high quality.

(4)Cutting by machine reduces stress and avoids soldered dot crack.

(5)PCB thickness: 0.5MM-3.2MM(cutting length: over 600MM can be customized).

(6)Residual PCB thickness: standard 1/3 PC board thick, MIN0.2MM，MAX0.8MM.

(7)V slot depth C minimum 0.25MM, the added external dimension after separating: 0.1MM-0.2MM.

(8)Install Photoelectric induction device. When the operator puts his hand into the cutting board area, the machine will stop operation automatically.