Product overview:

ULZC type hammer type level gauge used for measuring various silo material level,storage tank, storage tank, dustproof and its unique design of sealing structure can ensure instrument in multi dust environment in long-term reliable operation. The product has simple structure, convenient use, without deb ing, maintenance free.Maximum depth of up to 20 meters. For the ultrasonic, radar level meter due to dust,temperature causes application of field use effect is not ideal, ULZC is often the best solution.

Product features:

The simple structure, excellent performance, reliable, maintenance free

● AC200V power supply, low energy consumption, is suitable for field use

The optical sensing system excellent ●, completely sealed to ensure reliability

● humanized human-computer interface design

● analog and switch quantity output, signal isolation, reliable operation

Can provide powerful anti tensile ability of driving motor and heavy steel excellent ●

● intelligent motor control solutions, can correctly determine the wire rope state,without the use of may cause jam mechanical brake device

The intelligent sensor system, automatic identification of hammer, hammer automaticprocessing occurs buried fault, alarm signal processing failure, and it can be reset in the next cycle of measurement

● especially in the sealing device, solving the influence of dust effectively

Typical applications:

Measurement of material: dust, fly ash, mineral powder, coal, cement, plastic particles,PVC powder, grain, feed......

Application of field:

● steel factory: batching bin, ash storage silo, the silo......

● Electric Factory: fly ash bin, pulverized coal, raw coal silo....

● cement factory: cement silo, raw material warehouse, or bin......

Technical parameters:

The power supply voltage: AC220V 50/60Hz

● power consumption: 15VA steady state, dynamic 130VA

● operating temperature: -20~70 ℃

● measurement range: 0~20m

● measurement speed: 0.15m/s

● precision: + 1%

● repeat: + 1%

The resolution: 3cm

● timing cycle: 15~6999 minutes

● the hammer weight: 1kg (according to the range setting)

The output signal:

Analog output: 4~20mA (no external 24V), maximal loop impedance of 500 ohms

Relay output: the maximum AC250V/5A

The input signal: passive switch signal

● size: 155 x 80 x 135mm in length

● hole size: width * height (148+1) (74+1) mm