AUTOMATIC BRC Mesh Welding Machine

1.This kind machine is our latest developed reinforcing mesh welding machine.

2.The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. 

 3.The weft wire feeding from the multi hopper which capacity is more over ten times than the traditional hopper. 

4.The new machine added the bear wire net and carry equipment that makes the working more convenience .

5.The welding part is used the springiness input wire trunking  that makes the welding copper use for long time.

6.This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system.

7.The input front-panel is touch screen , the operate is more intelligent and reasonable

Main technical parameters:

Products & Application:

The welded mesh can be used in the floor & wall reinforcing mesh in the building, reinforcing mesh in the tunnel, bridge and road.

This machine is shown on our wire mesh fair of Anping in 2010.