Reflex Level Indicator give an accurate reading of liquid level, colorless liquid can be seen using the principles of light reflection
and reflection through the special prism glass. Light striking the area of glass covered by the liquid is allowed to pass to
the interior proof the gauge- this area appears black. Light striking the area of glass above the liquid is reflected black silver.
The distinct line that separates the black and silver areas shows the actual liquid level in the system.
Specifications:
1) Type : Reflex
2) Mounting : Side - Side /Top -Bottom
3) C/C Distance : To Mention
4) Visible length/ No. of section : To Mention
5) Service : To Mention
o 6) Op. pressure kg/Cm2g/temp. C/ Sp Gr : To Mention
7) Hydro test Pressure Kg/Cm2g : 1.5 times of Max Pressure
8) Process Conn. Flange size & rating : To Mention
9) Process Conn. Flange Material : To Mention
10) Material of Construction : Toughened Borosilicate Imported Klinger / Maxos / Indian make
11) Material of Construction : CS/SS 304/SS316/PP/PTFE
12) Material of Cover Plate : CS to ASTM A-105 (Non wetted parts)
13) Valve Type / Design : Ball Check / Auto Shut -Off
14) Valve Body Material : CS/SS 304/SS316/PP/PTFE
15) Valve Trim Material : SS 316
16) Vent / Drain connection : ½" NPT (F) with Plug (OR) To Mention.
17) Material of bolts & nuts : SS 316 MS, EN-8, SS or to mention
18) Gaskets/seals : CAF, AF 120, PTFE
Line are engraved @ each 10mm
19) Scale : Aluminum / Acrylic / SS Linear marking
20) Least count : 1mm, 5mm & 10mm or to Mention
Positioning:
These gauges are connected on the side of vessels, have liquid chamber made of single piece
metallic bar stock. Clear visibility of the path of the liquid in the chamber is provided by
clamping & Sealing firmly on the chamber heavy duty toughened glasses.
Accessories: Isolation valve, drain valve, vent valve -steam jacket arrangement
Option: IBR Approved available on request Application is widespread in Petrochemical,
Power, Fertilizer, and Pharmaceutical chemical Industries.
Application: Boiler, Ammonia Receiver, solvent etc.
Details Required For Quotation:
TRANSPARENT LEVEL INDICATOR
Transparent gauges give an accurate reading of liquid level, clear glass is mounted on the
front and back of the gauge. The permits the observer to see not only the level of the liquid,
but also its characteristics such as colour or the interface between two immiscible liquids in
the same system.
DETAILS REQUIRED FOR QUOTATION
1. Center to center distance
2. Material of construction of body/liquid chamber
3. Material of construction of cover plate
4. Connection detail
5. Operating pressure & temperature
6. IBR or non IBR
1) Type : Transparent
2) Mounting : Side - Side /Top -Bottom
3) C/C Distance : To Mention
4) Service : To Mention
5) Op Temp / Op. pressure kg/Cm2g/temp. C/ Sp Gr : To Mention
6) Process Conn. Flange size & rating : To Mention
7) Process Conn. Flange Material : To Mention
8) Material of Construction : CS/SS 304/SS316/PP/PTFE
9) Material of Cover Plate : CS to ASTM A-105 (Non wetted parts)
10) Valve Type / Design : Ball Check / Auto Shut -Off
11) Valve Body Material : CS/SS 304/SS316/PP/PTFE
12) Vent / Drain connection : ½" NPT (F) with Plug (OR) To Mention.
19) Scale : Aluminum / Acrylic / SS Linear marking
20) Least Count : 1mm, 5mm & 10mm or to Mention