High quality Pressurized solar water heater with CE, ISO, CCC.

Type:	Evacuated Tube	Pressure:	Pressurized	Circulation Type:	Indirect / Closed Loop (Active)
Heating System:	Thermosyphon (Passive)	Connection Type:	Direct-Plug	Installation:	Freestanding
Housing Material:	Colored Steel Plate	Certification:	CE,CCC,ISO9001	Capacity:	68
Place of Origin:	Zhejiang China (Mainland)	Brand Name:	Sunnyrain	Model Number:	TG-NP-01
Inner tank material:	SUS304 Stainless Steel	Connection:	Welding Type	optional accessories:	Electric heater, copper coil inside
Delivery port:	SHANGHAI or NINGBO

Packaging & Delivery

Packaging Detail:	Cartons and Foams
Delivery Detail:	Within 15 days

Specifications

Solar water heater
.Competitive price and good quality
.CE,ISO9001
.5-15 years warranty
.24hours service

  

[ACCEPT L/C AND OPEN ACCOUNT] [client customization] High quality Pressurized solar water heater with CE, ISO, CCC.  

 

 

PRESSURIZED SOLAR WATER HEATER FEATURE:

1.Adopts the best conduction performance metal- heat pipe (copper) 
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa 
5.No water in the tube, one tube broken don't influence the system working 
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof

8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out

 

PRESSURIZED SOLAR WATER HEATER SPECIFICATIONS:

1) Model no.: TG-M01  (complete set)

2) Capacity Optional : 68L

4) Working temperature: 99 celsius degree

4) Working pressure: 0.3MPa (3 bar)

5) Vacuum tube:  D58 , L1800mm

6) Absorber Area: 1.25m2

7) Cold resistance: -30

8) Tube Hail Resistance ≤25mm

 

 

Specification & Material
Commodity		Integrative Pressurized Solar Water Heater
Inner tank		SUS304-2B with thickness 1.2mm- 310mm
Outer tank		Galvanized steel alloy with thickness 0.4mm/S.S-420mm
Bracket		Galvanized steel alloy with thickness 1.6mm
Heat insulation layer		Imported polyurethane(PU) 50mm
Tube		58mm*1600mm solar vacuum tube with copper heat pipe
Working Temperature		99 Celsius degree
Working Pressure		0.6MPa(6Bar)
Certificate		CE,ISO9001:2008,CCC
Warranty		5 years for full system / 15 years for vacuum tube

 

Working Principle:

 

1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.

 

2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot

 

3.No water in the heat pipe makes the whole system could bear pressure