This camera takes pictures according to the light in the room. If sufficient light is detected, then a typical color picture is taken; however, if little to no light is found, an infrared picture is taken with a very cool "white effect". Additionally, the camera can be set to take a single picture or continuous pictures every couple seconds.

        The camera works via RS-232 connecting to a computer or a embedded system. It takes JPEG pictures and its command transmissions are identical to that of the JPEG camera that is not infrared.

Features:

• VGA/QVGA/160*120 resolution
• Support capture JPEG from serial port
• Default baud rate of serial port is 38400
• DC 3.3V or 5V power supply
• Current consumption: 80-100mA
• The pin near C03 is AV output pin, which is an analog output pin